最新KL620 铡刀式分板机的功能特点：　

   　双直刀分切，特别适用于分割精密SMD薄板,铝线路板

　　铡刀式工作，适用各种厚度PCB，切板行程在1-2mm以下，

　　将切板时所产生的内应力降至180uE以下,避免锡裂，防止精密零件受损

　　可分切V槽边缘与零件宽度最0.3mm,高度为70mm

　　刀具磨损后可免费翻磨

　　裁切率为1秒/1分割，由脚踏板气动开关控制.

　　裁切刀组为被动启动，可安全掌握裁切线及位置；裁切应力小，不易形成龟裂现象

　　非滚轮（轮刀，走刀）式裁切，无粉尘现象，无马达驱动，无碳粉污染.

　　非磨擦式切削，无刀具金属残留.

　　刀片使用保固6000000/次无电力供应，故无电器产品损耗，更换之情.

　　使用5-7KG的空压，无须特定切割场所；外观以防锈保养油擦拭即可

　　Features

　　1. Cutting with the double straight knife, it is especially suitable for the segmentation of precision SMD sheet and aluminum PCB.

　　2. With guilotine operation, it applies to PCB of all kinds of thickness, whose board schedule is less than 1-2mm, so there is no concerns about safety.

　　3. The inner stress when cutting will be under 180uE, in case of a soder crack and the damage of precision components.

　　4. The minimum width between the edge of V-groove and the parts is 0.3mm, and the maximum height is 70mm.

　　5. We provide free grinding of the blade after its abrasion .

　　6. The cutting rate is one segmentation for one second, controlled by pneumatic pedal switch.

　　7. The starting of the cutting set is for passive, so that the cutting tangent and position is under secure control. With little stress when cutting, there will no soder crack.

　　8. With cutting of nonroller (circular knife, straight knife ) type, there is no dust, no motor drive, and no carbon powder pollution.

　　9. With no-rubbing type cutting, there is no metal residue.

　　10. The blade can be used 600000/times without power supply, avoiding the loss and change of electrical products.

　　11. The machine uses 5-7kg air compressor without specific cutting place, and it is ok to wipe its appearance with the anti-rust oil for maintenance.